Simple Tips to Help You Unclog Your Drain

Clogged drains can cause bad odors around a home. They also make washing dishes cumbersome. The good news is that it is possible to unclog your drain without having to spend money on expensive drain-cleaning chemicals. Most of the time, all you need are products that are already in your home. The following are simple at-home fixes for a clogged drain.

Hot water

With time, dirt particles usually accumulate inside a drainage system's piping, causing blockages. When liquid grease solidifies inside a drain, it can also prevent the smooth flow of water through the system.

Flushing your drains with hot water is an effective unclogging technique because the sheer velocity of moving water can dislodge accumulated particles from the piping system. There is also the fact that the hot water can heat up any solidified grease, turning it back into liquid form. This not only clears the drains but also discourages any small particle accumulation, since these particles won't have a place to stick to.

The plunger

Your bathroom plunger can come in handy in unclogging your sink. To effectively unclog your sink, open your tap and let water run into the sink. With the water running, cover the drain opening with the plunger and then continuously use back-and-forth fluid motion.

If this doesn't work, check for an overflow vent. If your sink has one, then it is likely that any pressure that your plunger builds up is escaping through this vent. Simply cover the vent and then try again.

It is important to note that while running water while using the plunger is great at enabling the seal to form a better seal over the drain, you can get even better results by using petroleum jelly. Simply apply the jelly on the plunger's rim before using it. Doing so will maximize the force that the plunger generates, something that will significantly boost its drain-unclogging ability.

At-home concoctions

It is possible to create effective drain-unclogging solutions by simply mixing some of your kitchen products. One of the simplest and most effective solutions one can make is a baking soda and vinegar solution. Simply mix the two in equal parts and then pour the resulting solution down your drain. After you are done, rinse the drain with hot water.

The combination of vinegar and baking soda will be enough to break any bonds of accumulated dirt and oil. Rinsing thereafter with hot water will get rid of any remaining loose solids and debris and should be enough to get your drainage system operating as smoothly as it should.

Talk to a company such as Hemley's Septic Tank Cleaning for more advice or for professional help.

Share